ARCHITECT IN NEW YORK, NY - PROUDLY SERVING THE NEW YORK METROPOLITAN AREA

Architecture Work P.C.

Call Today

212-289-5700

Architecture Work P.C. Blog

Bob King

Recent Posts

8 years later - time to refresh

Posted by Bob King on Oct 20, 2018 12:49:53 PM

 Architecture Work, PC

Read More

Topics: Design Architect, NYC Architect, Residential Architect

Medical Office Architect

Posted by Bob King on May 9, 2018 3:16:33 PM

Medical Office Architect

To date Architecture Work P.C. in New York, NY has designed over a hundred offices in the metro area and Long Island including orthopedic, sports medicine, pain management, vascular, psychiatric, dermatological, plastic surgery and dental practices. On each project, we always strive to achieve the most efficient use of the space & make our doctors needs fit neatly. 

The first one we built at Architecture Work P.C. was for a prominent orthopedic surgeon on Long Island in 1984.  This was back in the day of paper files & voluminous onsite chart storage.  The administrative part of the office at that time consumed 1/3rd of the total floor space, which was considered quite efficient.  By the mid 1990’s that proportion was beginning to exceed almost 2/3rds the space allocated to administration!  The advent of electronic storage and the changing nature of payments to doctors created an effort to roll back this alarming trend – doctors became more aware of what they could “live with” in terms of the size of the rooms and computers enabled higher productivity of the staff.  Office “flow” for the floor plan layouts became paramount.

 

Read More

Topics: Medical Office Architect

Shelves – the Floating Glass Detail

Posted by Bob King on Apr 3, 2018 8:00:00 AM

 We have lots of shelving details which feature a concealed support, usually embedded inside the wall structure and from there inserted into the shelf using a bracket or mortised spline of some sort or another – all good, but not with glass. Since glass is a transparent solid. No manner of structure can be easily concealed within it. To mitigate this issue, we use a semi-concealed metal bracket system readily available online or from better hardware stores. The system we use is by GARCY HARDWARE that we order online here in NYC. Here’s link we use:

 http://www.davesanders.com/catalogdownload/sect11.pdf

 To get the “floating look”, the wall standard must first be concealed in the wall and securely attached as needed for the type of wall construction holding the standard. We used GARCY’s Super Heavy Duty Concealed Standard #GY148272 (6 foot long) and then cut to our custom length onsite. This standard has a concealed depth suitable for the 5/8ths inch thick drywall we used to laminate over the existing wall finish. They are available in sizes smaller & larger to accommodate various thicknesses of whatever wall finish you may be considering using, such as a fabric wrapped panel, mirrors, stone slab or wood paneling among others.

Read More

Topics: Our favorite architectural details

Lighting – What was “old” is “new” again

Posted by Bob King on Mar 27, 2018 9:41:52 AM
The expansion of the LED market into mainstream retail stores has us taking a second look at lighting trims and recessed housings popular when incandescent bulbs were the only choice for lamping. The cost and quality of LED lamping has dropped dramatically over the past few years. I bought some on sale over a year ago oddly enough at COSTCO for about 2 bucks a 60 watt equivalent “A” style bulb for myself. I also bought some 100 watt equivalent ones in the standard outdoor “flood” style for just a few bucks more. In all I spent about 75 dollars & re-lamped part of my house in Connecticut to see for myself.

I learned a few things:

  • Theres absolutely no difference between incandescent and LED, appearance-wise, in color, when properly specified (3-4000K).

  • The monthly electrical bill plummeted more than enough to pay for this expenditure every three weeks as electricity in CT has about the nation’s highest rates. Since the expected “lifespan” is 25 years – do the math as this is a “no-brainer”.

  • The few 60 watt equivalent “A” style bulbs did not fare well in my outdoor sealed “jar” type BEGA porch lights & I’m pretty sure that air circulation (there wasn’t any...) was the culprit as they dimmed quite a bit until I removed the sealed glass casing inside the housing – problem solved.

  • I also re-lamped my outdoor HALO recessed downlights which have “retrofit” housings that have vent holes at the top of the housing & they’re also doing just fine, same for the interior recessed lights.

  • Outdoors the floodlights are also doing quite well & give off lots of 4000K light as they are seated in simple exposed socket type housings I got at HOME DEPOT years ago.

  • My original SKYLARK sliding dimmer switches only dim about halfway & then the light goes off, so I have to change the dimmers to more expensive ones that can do the job. For now the dimming capability is not an issue for me. Note that LED lamps remain at the same “color” even when dimmed verses incandescent which do not, so no “yellowing” of the light band.

Currently, we are again specifying older model HALO & LIGHTOLIER open trim recessed housings where insulated ceilings are not present and the space above has some “breathing air” for keeping the lamping from over- heating”. This is really dropping the light fixture budgets by orders of magnitude on our projects both commercial and residential. The look is still both clean and modern. For projects that need “trim-less, plaster-in” LED devices, there’s always our favorites from LUCIFER and BIRCHWOOD Lighting to bridge the appearance gap.

If you’re using LED lamping retrofits with older housings or other light fixtures heat dissipation is crucial to lamp longevity, so use your own judgement when making a selection.

Read More

Topics: Innovative lighting for medical and residential

Commercial and Residential Lighting Solutions - What's "Old" is "New" again.

Posted by Bob King on Mar 16, 2018 2:09:28 PM

Lighting – What was “old” is “new” again. ARCHITECTURE WORK PC
William Robert King, R.A.

The expansion of the LED market into mainstream retail stores has us taking a second look at lighting trims and recessed housings popular when incandescent bulbs were the only choice for lamping. The cost and quality of LED lamping has dropped dramatically over the past few years. I bought some on sale over a year ago oddly enough at COSTCO for about 2 bucks a 60 watt equivalent “A” style bulb for myself. I also bought some 100 watt equivalent ones in the standard outdoor “flood” style for just a few bucks more. In all I spent about 75 dollars & re-lamped part of my house in Connecticut to see for myself.

I learned a few things:

  • There’s absolutely no difference between incandescent and LED, appearance-wise, in color, when properly specified (3-4000K).
  • The monthly electrical bill plummeted more than enough to pay for this expenditure every three weeks as electricity in CT has about the nation’s highest rates. Since the expected “lifespan” is 25 years – do the math as this is a “no-brainer”.
  • The few 60 watt equivalent “A” style bulbs did not fare well in my outdoor sealed “jar” type BEGA porch lights & I’m pretty sure that air circulation (there wasn’t any...) was the culprit as they dimmed quite a bit until I removed the sealed glass casing inside the housing – problem solved.
  • I also re-lamped my outdoor HALO recessed downlights which have “retrofit” housings that have vent holes at the top of the housing & they’re also doing just fine, same for the interior recessed lights.
  • Outdoors the floodlights are also doing quite well & give off lots of 4000K light as they are seated in simple exposed socket type housings I got at HOME DEPOT years ago.
  • My original SKYLARK sliding dimmer switches only dim about halfway & then the light goes off, so I have to change the dimmers to more expensive ones that can do the job. For now the dimming capability is not an issue for me. Note that LED lamps remain at the same “color” even when dimmed verses incandescent which do not, so no “yellowing” of the light band.

 

Currently, we are again specifying older model HALO & LIGHTOLIER open trim recessed housings where insulated ceilings are not present and the space above has some “breathing air” for keeping the lamping from over- heating”. This is really dropping the light fixture budgets by orders of magnitude on our projects both commercial and residential. The look is still both clean and modern. For projects that need “trim-less, plaster-in” LED devices, there’s always our favorites from LUCIFER and BIRCHWOOD Lighting to bridge the appearance gap.

If you’re using LED lamping retrofits with older housings or other light fixtures heat dissipation is crucial to lamp longevity, so use your own judgement when making a selection.

Read More

Topics: Innovative lighting for medical and residential

Happy New Year 2018 from our house to your's

Posted by Bob King on Jan 2, 2018 12:15:18 PM

Sharon, Ct. December 31, 2017

Read More

Topics: Uncategorized

Office Based Surgery (OBS) Part 3

Posted by Bob King on Nov 18, 2015 4:40:37 PM

Office Based Surgery (OBS) Part 3

Read More

Topics: Doctor's Offices and OBS

Office Based Surgery  (OBS) Part 2

Posted by Bob King on Nov 17, 2015 12:00:19 PM

Office Based Surgery (OBS)  Part 2

Read More

Topics: Doctor's Offices and OBS

Follow Us on LinkedIn!